Repairs

Some issues that you may have with your trolley can be repaired quite easily but care should be taken particularly with electrical components as we have seen these jobs under taken which have resulted in blown control boxes and switches. Our advice would be to let us do the jobs we have experience and knowledge in and do them for you with the comfort that it will be done properly and with guarantees.  

Potentiometer

The potentiometer or ‘pot’ as it’s known is the switch on your electric golf trolley and can be found in the handle part of your trolley. It will be in a circuit with the wiring loom and control box to switch on/off and change the speed of your trolley and is one of the most common parts that need replacing. A faulty pot can also be the cause when your trolley is ‘stuck’ at one particular speed and the only way to stop the trolley is to disconnect the power supply, so the connection leads should just be taken out from the battery to stop it.

GTG

Wiring Loom

The wiring loom or main cable takes the electrical current around your trolley, It connects the control box with the switch and /or potentiometer and is an important piece in the system to make your trolley run correctly. Do check for cuts or breakages in this wire particularly around hinged areas and places where the wire goes into or out of the frame.

GTG

Potentiometer

The potentiometer or ‘pot’ as it’s known is the switch on your electric golf trolley and can be found in the handle part of your trolley. It will be in a circuit with the wiring loom and control box to switch on/off and change the speed of your trolley and is one of the most common parts that need replacing. A faulty pot can also be the cause when your trolley is ‘stuck’ at one particular speed and the only way to stop the trolley is to disconnect the power supply, so the connection leads should just be taken out from the battery to stop it.

GTG